Home Backup Bandwidth Calculator

Check whether your upload speed can complete a home backup inside the nightly window you have available.

About Home Backup Bandwidth Calculator

Gigabytes are converted to megabits by multiplying by 8,000, then divided by the throughput actually achieved. Real transfers never hit line rate because of protocol overhead, disk speed and contention, so the efficiency factor derates it first. A backup quoted at line rate is always optimistic; planning a maintenance window on the derated figure is what stops it overrunning.

Formula

Home Backup Bandwidth

Time = size × 8,000 ÷ (line rate × efficiency), in seconds

Data to back up: Amount of data to move
line rate: Nominal link speed in Mbps

Worked example

With the default values below, Home Backup Bandwidth Calculator returns Transfer Time of 13.889. Change any input above and every figure here is recalculated in your browser.

Inputs used

Data to back upminimum 0 GB: 200 GB
Connection speedminimum 0.01 Mbps: 40 Mbps
Achieved share of line rateaccepts 0–100 %: 80 %

Results

Transfer Time: 13.889 hours
Transfer Time: 833.3 minutes
Transfer Time: 13h 53m
Effective Throughput: 32.00 Mbps
Effective Throughput: 4.00 MB/s

Step by step

1Values used
2Home Backup Bandwidth
3Transfer Time= 13.889 hours
4Transfer Time= 833.3 minutes
5Transfer Time= 13h 53m
6Effective Throughput= 32.00 Mbps
7Effective Throughput= 4.00 MB/s

Assumptions and limits

The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
Figures are rounded for display to 3 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

How is Home Backup Bandwidth calculated?

Time = size × 8,000 ÷ (line rate × efficiency), in seconds Gigabytes are converted to megabits by multiplying by 8,000, then divided by the throughput actually achieved. Real transfers never hit line rate because of protocol overhead, disk speed and contention, so the efficiency factor derates it first.

Why does Home Backup Bandwidth matter?

A backup quoted at line rate is always optimistic; planning a maintenance window on the derated figure is what stops it overrunning.

What values do I need to enter?

This calculator takes 3 inputs: Data to back up, Connection speed, Achieved share of line rate. The pre-filled defaults are a realistic starting point — replace them with figures from your own environment for a result you can act on.