Fence Length & Cost
Estimate the length and material cost of a boundary fence.
About Fence Length & Cost
The fence line is the measured boundary, and panels plus posts derive from standard spacings. Material cost is simply the length times the per-foot price. Fencing material is priced per linear foot, while posts and gates add to the total, so both line length and extras set the real budget.
Formula
Fence Length & Cost
Panels = length x (1 + gate%) / panel width
- grouping
- Posts usually every 8 feet plus corners
Worked example
With the default values below, Fence Length & Cost returns Fence Line of 120.0. Change any input above and every figure here is recalculated in your browser.
Inputs used
- Fence lengthminimum 0 ft
- 120 ft
- Gate allowanceaccepts 0–50 %
- 10 %
- Price per footminimum 0
- 18
Results
- Fence Line
- 120.0 ft
- 6 ft Panels
- 22
- Material Cost
- $2,160.00
- Posts Needed
- 16
Step by step
- 1Values used
- 2Fence Length & Cost
- 3Fence Line= 120.0 ft
- 46 ft Panels= 22
- 5Material Cost= 2,160.00
- 6Posts Needed= 16
Assumptions and limits
- The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
- In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
- Figures are rounded for display to 2 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.
How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.
Frequently Asked Questions
How is Fence Length & Cost calculated?
Panels = length x (1 + gate%) / panel width The fence line is the measured boundary, and panels plus posts derive from standard spacings. Material cost is simply the length times the per-foot price.
Why does Fence Length & Cost matter?
Fencing material is priced per linear foot, while posts and gates add to the total, so both line length and extras set the real budget.
What values do I need to enter?
This calculator takes 3 inputs: Fence length, Gate allowance, Price per foot. The pre-filled defaults are a realistic starting point — replace them with figures from your own environment for a result you can act on.