Relay Team Time Calculator

Work out relay team time instantly with clear inputs, formula shown and shareable results.

About Relay Team Time Calculator

The team time is the sum of the four legs, and the spread between fastest and slowest shows how evenly the squad is matched. A large spread means the running order matters, since the fastest leg is usually best saved for the anchor where it can chase down a deficit.

Formula

Team time

total = leg 1 + leg 2 + leg 3 + leg 4

Worked example

With the default values below, Relay Team Time Calculator returns Team total time of 204.70. Change any input above and every figure here is recalculated in your browser.

Inputs used

Leg 1 timeminimum 0.1 s: 52.4 s
Leg 2 timeminimum 0.1 s: 50.8 s
Leg 3 timeminimum 0.1 s: 51.6 s
Leg 4 timeminimum 0.1 s: 49.9 s

Results

Team total time: 204.70 s
Total as minutes and seconds: 3:25
Average leg time: 51.18 s
Gap between fastest and slowest leg: 2.50 s

Step by step

1Values used
2Team time
3Team total time= 204.70 s
4Total as minutes and seconds= 3:25
5Average leg time= 51.18 s
6Gap between fastest and slowest leg= 2.50 s

Assumptions and limits

The result is derived only from the 4 inputs listed above. Anything not among them is not part of the calculation.
In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
Figures are rounded for display to 2 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

How is the Relay Team Time figure worked out?

total = leg 1 + leg 2 + leg 3 + leg 4. The team time is the sum of the four legs, and the spread between fastest and slowest shows how evenly the squad is matched.

Why does this matter?

A large spread means the running order matters, since the fastest leg is usually best saved for the anchor where it can chase down a deficit.

What do I need to enter?

Enter leg 1 time, leg 2 time, leg 3 time, leg 4 time. The defaults shown are a realistic worked example — swap in your own figures to get a result you can use.