Vermicompost Yield Calculator
Work out vermicompost yield instantly with clear inputs, formula shown and shareable results.
About Vermicompost Yield Calculator
Vermicomposting converts 40-50% of feedstock mass into vermicompost, the rest lost as carbon dioxide and moisture. Worms consume roughly their own body weight in feed each day, so worm biomass required is the daily feed rate. Worm biomass typically doubles every 60-90 days under good conditions.
Formulas
Vermicompost yield
Yield = feedstock x conversion efficiency
Worm requirement
Worm biomass = daily feed rate x stocking rate
Worked example
With the default values below, Vermicompost Yield Calculator returns Vermicompost Yield of 450.00. Change any input above and every figure here is recalculated in your browser.
Inputs used
- Feedstock Chargedminimum 0 kg
- 1,000 kg
- Conversion To Vermicompostaccepts 0–100 %
- 45 %
- Worm Stocking Rateminimum 0 kg worms per kg feed per day
- 1 kg worms per kg feed per day
- Cycle Durationminimum 0 days
- 60 days
Results
- Vermicompost Yield
- 450.00
- Worm Biomass Required
- 16.667
- Daily Feed Rate
- 16.667
- Worm Biomass Gain
- 8.333
Step by step
- 1Values used
- 2Vermicompost yield
- 3Worm requirement
- 4Vermicompost Yield= 450.00
- 5Worm Biomass Required= 16.667
- 6Daily Feed Rate= 16.667
- 7Worm Biomass Gain= 8.333
Assumptions and limits
- The result is derived only from the 4 inputs listed above. Anything not among them is not part of the calculation.
- In particular, this calculator does not take inflation, tax or compounding frequency into account.
- Figures are rounded for display to 3 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.
How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.
Frequently Asked Questions
Why must feedstock be pre-composted?
Fresh material heats up and generates ammonia, both of which kill worms. Two to three weeks of thermophilic pre-composting stabilises it and destroys pathogens before the worms are introduced.
What conditions do worms need?
Moisture 70-80%, temperature 15-25 C, pH 6.5-7.5 and good aeration. Outside those ranges feeding slows sharply or the population dies.
Related Calculators
- Material Recovery Yield Calculator
- Activated Carbon Dose Calculator
- Aeration Tank Volume Calculator
- Air Emission Stack Height Calculator
- Alum Dose For Coagulation Calculator
- Ambient Concentration Estimate Calculator
- Backwash Water Volume Calculator
- Baghouse Filter Area Calculator
- Bin Capacity Planning Calculator
- Biogas From Sludge Calculator
You might also need
- Material Recovery Yield CalculatorAlso in Water, Waste & Environmental Engineering
- E Waste Volume CalculatorAlso in Water, Waste & Environmental Engineering
- BOD Load CalculatorAlso in Water, Waste & Environmental Engineering
- Chlorine Residual CalculatorAlso in Water, Waste & Environmental Engineering
- COD Load CalculatorAlso in Water, Waste & Environmental Engineering
- Detention Time CalculatorAlso in Water, Waste & Environmental Engineering
