Skip to content
ENExplore Calculators

Resin Print Volume Calculator

Work out resin print volume instantly with clear inputs, formula shown and shareable results.

About Resin Print Volume Calculator

Each part consumes its own volume plus a supports and raft allowance, and the plate total multiplies that by the number of copies. Resin printing time depends on plate height not part count, so filling the plate spreads the same exposure time across more parts at no extra time cost.

Formulas

Resin per part

ml = model volume x (1 + supports allowance)

Plate cost

cost = plate ml / 1000 x price per litre

Worked example

With the default values below, Resin Print Volume Calculator returns Resin needed for the plate of 115.00. Change any input above and every figure here is recalculated in your browser.

Inputs used

Model volumeminimum 0.01 ml
25 ml
Supports and raft allowanceaccepts 0–100 %
15 %
Resin price per litreminimum 0.01
40
Copies per plateminimum 1
4

Results

Resin needed for the plate
115.00 ml
Resin per part including supports
28.750 ml
Resin cost for the plate
$4.600
Parts per litre of resin
34

Step by step

  1. 1Values used
  2. 2Resin per part
  3. 3Plate cost
  4. 4Resin needed for the plate= 115.00 ml
  5. 5Resin per part including supports= 28.750 ml
  6. 6Resin cost for the plate= 4.600
  7. 7Parts per litre of resin= 34

Assumptions and limits

  • The result is derived only from the 4 inputs listed above. Anything not among them is not part of the calculation.
  • In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
  • Figures are rounded for display to 3 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

How is the Resin Print Volume figure worked out?

ml = model volume x (1 + supports allowance). Each part consumes its own volume plus a supports and raft allowance, and the plate total multiplies that by the number of copies.

Why does this matter?

Resin printing time depends on plate height not part count, so filling the plate spreads the same exposure time across more parts at no extra time cost.

What do I need to enter?

Enter model volume, supports and raft allowance, resin price per litre, copies per plate. The defaults shown are a realistic worked example — swap in your own figures to get a result you can use.

Related Calculators

Resin Print Volume Calculator | Calcrivo