Area Converter Calculator

Work out area converter instantly with clear inputs, formula shown and shareable results.

About Area Converter Calculator

Every area unit is defined as a multiple of the square metre, so this converter works in two steps: multiply the input by the source unit's factor to reach square metre, then divide by the target unit's factor. That is why any pair in the list converts correctly without needing a separate formula for each combination.

Formulas

Two-step conversion

result = value × factor(from) ÷ factor(to)

Base unit

base (square metre) = value × factor(from)

Worked example

With the default values below, Area Converter Calculator returns Converted Value of 10.763910. Change any input above and every figure here is recalculated in your browser.

Inputs used

Value: 1
From unitone of Square centimetre (cm²), Square metre (m²), Square kilometre (km²), Square inch (in²), Square foot (ft²), Square yard (yd²), Acre, Hectare (ha), Square mile (mi²), Bigha (pucca, 0.625 acre), Guntha (1,089 ft²), Cent (435.6 ft²), Marla (272.25 ft²), Kanal (5,445 ft²): Square metre (m²)
To unitone of Square centimetre (cm²), Square metre (m²), Square kilometre (km²), Square inch (in²), Square foot (ft²), Square yard (yd²), Acre, Hectare (ha), Square mile (mi²), Bigha (pucca, 0.625 acre), Guntha (1,089 ft²), Cent (435.6 ft²), Marla (272.25 ft²), Kanal (5,445 ft²): Square foot (ft²)

Results

Converted Value: 10.763910
Result Unit: Square foot (ft²)
Value in square metre (base): 1.000000
Multiplier Applied: 10.76391042

Step by step

1Values used
2Two-step conversion
3Base unit
4Converted Value= 10.763910
5Result Unit= Square foot (ft²)
6Value in square metre (base)= 1.000000
7Multiplier Applied= 10.76391042

Assumptions and limits

The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
Figures are rounded for display to 8 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

Why convert through square metre instead of directly?

With 14 units there would be 182 direct pairs to maintain. Routing through square metre needs only one factor per unit and gives identical results.

Does the order of the two dropdowns matter?

Yes — the first is the unit your number is already in, the second is the unit you want. Swapping them inverts the result.