Skip to content
ENExplore Calculators

Data Transfer Rate Converter Calculator

Work out data transfer rate converter instantly with clear inputs, formula shown and shareable results.

About Data Transfer Rate Converter Calculator

Each data rate unit is defined as a multiple of the bit per second, so the conversion runs in two steps: multiply by the source unit's factor to reach bit per second, then divide by the target unit's factor. One factor per unit covers every pair in the list. Network speeds are quoted in bits per second while file transfers show bytes per second, so a 100 Mbit/s link downloads at about 12.5 MB/s.

Formulas

Two-step conversion

result = value × factor(from) ÷ factor(to)

Base value

base (bit per second) = value × factor(from)

Worked example

With the default values below, Data Transfer Rate Converter Calculator returns Converted Value of 12.500000. Change any input above and every figure here is recalculated in your browser.

Inputs used

Value
100
From unitone of Bit per second (bit/s), Kilobit per second (kbit/s), Megabit per second (Mbit/s), Gigabit per second (Gbit/s), Byte per second (B/s), Kilobyte per second (kB/s), Megabyte per second (MB/s), Gigabyte per second (GB/s)
Megabit per second (Mbit/s)
To unitone of Bit per second (bit/s), Kilobit per second (kbit/s), Megabit per second (Mbit/s), Gigabit per second (Gbit/s), Byte per second (B/s), Kilobyte per second (kB/s), Megabyte per second (MB/s), Gigabyte per second (GB/s)
Megabyte per second (MB/s)

Results

Converted Value
12.500000
Result Unit
Megabyte per second (MB/s)
Value in bit per second (base)
100,000,000.000000
Multiplier Applied
0.12500000

Step by step

  1. 1Values used
  2. 2Two-step conversion
  3. 3Base value
  4. 4Converted Value= 12.500000
  5. 5Result Unit= Megabyte per second (MB/s)
  6. 6Value in bit per second (base)= 100,000,000.000000
  7. 7Multiplier Applied= 0.12500000

Assumptions and limits

  • The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
  • In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
  • Figures are rounded for display to 8 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

Why route through bit per second?

With 8 units, direct pairs would mean 56 factors to maintain. Going via bit per second needs one factor per unit and gives the same answer.

Does the dropdown order matter?

Yes. The first is the unit your figure is already in; the second is what you want it in. Swapping them inverts the result.

Related Calculators

Data Transfer Rate Converter Calculator | Calcrivo