mmHg Converter Calculator

Work out mmhg converter instantly with clear inputs, formula shown and shareable results.

About mmHg Converter Calculator

Each pressure unit is defined as a multiple of the pascal, so the conversion runs in two steps: multiply by the source unit's factor to reach pascal, then divide by the target unit's factor. One factor per unit covers every pair in the list. 1 mmHg is 133.322387415 Pa. It is very close to the torr but not identical — they differ by about one part in seven million.

Formulas

Two-step conversion

result = value × factor(from) ÷ factor(to)

Base value

base (pascal) = value × factor(from)

Worked example

With the default values below, mmHg Converter Calculator returns Converted Value of 101.325014. Change any input above and every figure here is recalculated in your browser.

Inputs used

Value: 760
From unitone of Pascal (Pa), Kilopascal (kPa), Megapascal (MPa), Bar, Millibar (mbar), Pound per square inch (psi), Standard atmosphere (atm), Millimetre of mercury (mmHg), Torr, Inch of mercury (inHg), Kilogram-force per cm² (kgf/cm²): Millimetre of mercury (mmHg)
To unitone of Pascal (Pa), Kilopascal (kPa), Megapascal (MPa), Bar, Millibar (mbar), Pound per square inch (psi), Standard atmosphere (atm), Millimetre of mercury (mmHg), Torr, Inch of mercury (inHg), Kilogram-force per cm² (kgf/cm²): Kilopascal (kPa)

Results

Converted Value: 101.325014
Result Unit: Kilopascal (kPa)
Value in pascal (base): 101,325.014435
Multiplier Applied: 0.13332239

Step by step

1Values used
2Two-step conversion
3Base value
4Converted Value= 101.325014
5Result Unit= Kilopascal (kPa)
6Value in pascal (base)= 101,325.014435
7Multiplier Applied= 0.13332239

Assumptions and limits

The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
Figures are rounded for display to 8 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

Why route through pascal?

With 11 units, direct pairs would mean 110 factors to maintain. Going via pascal needs one factor per unit and gives the same answer.

Does the dropdown order matter?

Yes. The first is the unit your figure is already in; the second is what you want it in. Swapping them inverts the result.