Skip to content
ENExplore Calculators

Torque Converter Calculator

Work out torque converter instantly with clear inputs, formula shown and shareable results.

About Torque Converter Calculator

Each torque unit is defined as a multiple of the newton metre, so the conversion runs in two steps: multiply by the source unit's factor to reach newton metre, then divide by the target unit's factor. One factor per unit covers every pair in the list.

Formulas

Two-step conversion

result = value × factor(from) ÷ factor(to)

Base value

base (newton metre) = value × factor(from)

Worked example

With the default values below, Torque Converter Calculator returns Converted Value of 73.756215. Change any input above and every figure here is recalculated in your browser.

Inputs used

Value
100
From unitone of Newton metre (N·m), Kilogram-force metre (kgf·m), Pound-force foot (lbf·ft), Pound-force inch (lbf·in), Ounce-force inch (ozf·in)
Newton metre (N·m)
To unitone of Newton metre (N·m), Kilogram-force metre (kgf·m), Pound-force foot (lbf·ft), Pound-force inch (lbf·in), Ounce-force inch (ozf·in)
Pound-force foot (lbf·ft)

Results

Converted Value
73.756215
Result Unit
Pound-force foot (lbf·ft)
Value in newton metre (base)
100.000000
Multiplier Applied
0.73756215

Step by step

  1. 1Values used
  2. 2Two-step conversion
  3. 3Base value
  4. 4Converted Value= 73.756215
  5. 5Result Unit= Pound-force foot (lbf·ft)
  6. 6Value in newton metre (base)= 100.000000
  7. 7Multiplier Applied= 0.73756215

Assumptions and limits

  • The result is derived only from the 3 inputs listed above. Anything not among them is not part of the calculation.
  • In particular, this calculator does not take inflation, tax, fees or charges or compounding frequency into account.
  • Figures are rounded for display to 8 decimal places, so totals built from several rounded parts can differ slightly from the unrounded arithmetic.

How these calculators are built and tested is described on the Methodology page. If a figure looks wrong, please report it.

Frequently Asked Questions

Why route through newton metre?

With 5 units, direct pairs would mean 20 factors to maintain. Going via newton metre needs one factor per unit and gives the same answer.

Does the dropdown order matter?

Yes. The first is the unit your figure is already in; the second is what you want it in. Swapping them inverts the result.

Related Calculators

Torque Converter Calculator | Calcrivo